INSTALLATION INSTRUCTIONS FS006
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 11
Enclosure Mounting Brackets
Figure 4
Determine where the cable will enter the enclosure.
Carefully remove the knock-out at that entry location
of the fiber tray so as not to damage surrounding
sheet metal. DO NOT Install grommet at this stage,
grommet will be installed after enclosure is mounted
to rack.
Note:
Cover removal is not required for proper
fiber optic cabling installation.
To remove the cover if desired, unscrew the four
#4-40 screws and lift cover up and off.
#4-40 screws
Use (2) #12-24 X 1/2"
screws (provided). Repeat
for other side.
Place enclosure mounting brackets at desired
position on the rack. Mount the enclosure to the
rack using (4) #12-24 x 12
"
screws. Use (4)
M6 x 1 screws if mounting to a metric rack.
Figure 2
Figure 3
Figure 4A
Preparation and Rack Mounting
