Configure a Failover Connection
96
9. Select “Enable Dual System Director Configuration.”
10. Configure the Virtual Addresses on both systems by doing the following:
a.
Choose two unused static IP address that are used as the Virtual IP addresses for both
System Directors. This example uses 192.168.10.253 and 192.168.20.253.
b.
Map the Virtual IP address to the corresponding real IP address for each of the System
Directors. This example uses 192.168.10.100 and 192.168.20.100.
c.
Register both of the Virtual IPs in DNS with the Virtual System Director Name.
11. In the Local Machine area leave the Monitor port set to 5000. If you have another
application that uses port 5000, change the Monitor port to an available port number. This
port number must be the same on both the existing and the new System Directors.
12. Set the Local Machine First Path IP address to local IP 1: 192.168.1.1.
13. Set the Local Machine Second Path IP address to local IP 2: 192.168.2.1.
14. Set the Remote Machine First Path IP address to: 192.168.1.2.
15. Set the Remote Machine Second Path IP address to: 192.168.2.2.
The Active System Director has now been configured. Leave the Active System Director as
is; stopped and with the ISIS Control Panel and Dual System Director Configuration
window open.
16. Continue with
“To set up the resiliency connection on the Standby System Director:” on
.
Enable Dual System
Director Configuration
Содержание ISIS 2000
Страница 1: ...Avid ISIS 2000 Setup Guide...
