Media Drive Replacement
162
5. Pull the drive upwards and out of the drawer.
n
If you are not going to replace the drive immediately, close the drawer so that correct airflow
and cooling are maintained in the Engine.
Replacing a Media Drive
When the new media drive is inserted, the ISIS 2000 automatically makes the new drive into a
hot spare.
To insert a media drive:
1. If the appropriate drawer is not already open, open it using the instructions in section see
“Media Drive Drawer” on page 158
.
2. Lower the Media Drive into the slot, with the drive capacity label facing towards you.
3. Push the media drive downwards and hold it down while sliding the drive carrier plate in the
direction shown in the following figure. This locks the drive in place.
Make sure the drive is securely locked into place before closing the drawer.
Содержание ISIS 2000
Страница 1: ...Avid ISIS 2000 Setup Guide...