Avid Technology HDX-192 Cooling Kit, Руководство по установке

Страница: 7 / 8

HDX-192 Cooling Kit Installation 7
Confirming Installation
To confirm installation:
1
Connect power to the E6L, and connect an audio network ca-
ble from your S6L control surface to E6L.
2
Power on your S6L and E6L.
3
On the external VENUE software screen, go to the Options >
Devices page.
In the HDX DSP section you should see tab(s) 1–4 correspond-
ing to slots in which HDX-192 cards are installed.
If you do not see all installed HDX-192 cards listed, power
down the system, disconnect and remove the core from the
E6L engine and double-check all cable connections.
Make sure you have already installed VENUE software
version 5.7 or higher.
Figure 28. Options > Devices page showing two HDX-192 cards