Avid Technology Eleven Rack, Руководство пользователя

Страница: 44 / 124

Eleven Rack User Guide 36
To set the type of signal to send to the amp:
1
Press and hold the Edit/Back button to show
the User Options mode.
2
Scroll to
Outputs To Amp
with the Scroll wheel.
3
Press SW1 to enter the Outputs To Amp
screen.
4
Choose the output you plan to use to feed the
amp, with the Scroll wheel.
5
Set the
Signal
control to one of the following,
using the first lit Control knob:
•
Rig Input
(no processing)
•
Amp Input
(pre-amp effects only)
•
Amp Output
(effects and amp simulation)
6
Press Edit/Back twice to leave User Options
mode.
The signal level running to each Output To
Amp output can be set on a per-rig basis in
the Output section in Rig View or in the
Eleven Rack Control window. For more de-
tails, see “OUTPUT” on page 17, or “Out-
put to Amp Selectors” on page 80.
Because Eleven Rack simulates various pre-
amps and tone circuits, you may want to by-
pass your amp’s preamp and tone circuitry
by plugging into the amplifier’s effects re-
turn jack(s), if available, rather than the
standard input(s). If your amp does not
have an effects loop, try setting the amp
controls for maximum transparency (EQ
flat, gain stages set to clean.)