Avid Technology Eleven Rack, Руководство пользователя, Страница: 88 / 124

Eleven Rack User Guide 80
Each of the four Configs can be set to one pa-
rameter of one of the devices in the Rig. The Toe
and Heel settings govern the top and bottom of
the sweep of the control.
Output to Amp Selectors
The Output to Amp selectors let you choose
what point in the signal path feeds Output To
Amp outputs one and two, and set the output
volume for each, to better match the input sen-
sitivity of the external amp or processor.
To set the volume of the signal sent to each To
Amp output:
Left-click the chosen To Amp output selector,
and adjust the volume using the fader.
To choose what signal feeds each To Amp output:
„
Right-click one of the To Amp Output selec-
tors, and do one of the following:
• If the selector you click is not yet assigned
(greyed out), a menu is displayed, letting
you choose to send the signal at the chosen
location to Output to Amp output one,
two, or both in stereo.
– or –
• If the selector you click is already assigned
to an Output to Amp out (highlighted),
you get a menu letting you assign that To
Amp output to another point in the signal
chain.
Amp/Cab, Effects and Pedal
Settings
This section of the Rig View pane lets you reveal,
select, move, and bypass all of the amp, cabinet,
effects, and pedals in the current Rig. Click on a
piece of gear to highlight it, and it will show up
in the Control section below.
Bypassing Amps, Cabs, and
Effects
You can toggle the various gear in the current
Rig on and off by clicking the name of the
desired element.
If you set the Heel number higher than the
Toe number, the control can be swept in re-
verse.
For more information on the functions of
the amp, cab, and effects controls, “The
Amps” on page 20, and “The Effects” on
page 27.