Avid Technology Eleven Rack, Руководство пользователя

Страница: 25 / 124

Chapter 3: Exploring Rigs 17
REV
Turn the lit Control knob to select the type of
Reverb effect you want to use. Press
CONTROLS
to access additional settings for the chosen Re-
verb effect.
DLY
Turn the lit Control knob to select the type of
Delay effect you want to use. Press
CONTROLS
to
access additional settings for the chosen Delay
effect.
FX LOOP
Press
CONTROLS
to access a Control page where
you can adjust the gain and blend settings of the
FX Loop, using the lit Control knobs.
Utility Settings
INPUT
Turn the lit Control knob to manipulate the
True-Z impedance circuitry in Eleven Rack.
When set to
Auto
, the input impedance is deter-
mined by the first active effect or amp in the sig-
nal chain. You can also choose a specific load
value to best match your pickups.
OUTPUT
Turn the lit Control knob to set the output level
of the Rig (known as the Rig volume). Press
CONTROLS
to access a Control page, where you
can set the volume of the signals feeding the To
Amp outputs. Press
MONO
to toggle between ste-
reo or mono output.
The Rig volume setting is a tonally transparent
volume control, intended for making fine ad-
justments to the relative volume levels of differ-
ent Rigs.
The To Amp output volume settings let you op-
timize signal level for the amp(s) or external pro-
cessors you are sending signal to.
DISPLAY
Turn the lit Control knob to specify what con-
trols are displayed in the Default view of Rig Se-
lect mode.
TEMPO
Turn the lit Control knob to set the Rig tempo.
Any amp or effects settings that have a control
set to sync to a specific subdivision of Rig tempo
will lock to this tempo.
Press
MIDI to
toggle sync of Rig tempo to incom-
ing MIDI clock (from the MIDI input of Eleven
Rack) on or off.
Press
FINE
to toggle fine tempo editing mode on
or off. In this mode, turn the Scroll wheel to ad-
just the Rig tempo in tenths of a BPM, rather
than the coarse adjustments that are made with
the Control knob. Press
FINE
again to return to
the normal mode.
Effects and the FX Loop can be moved to
different locations in the signal chain of the
Rig. For that reason, when an effect or the
FX Loop is selected in Rig View, SW2 is la-
beled MOVE. For more details, see “Signal
Routing” on page 18.