Avid Technology Eleven Rack, Руководство пользователя

Страница: 102 / 124

Eleven Rack User Guide 94
Rig Balancing
This screen lets you adjust the relative signal
level of each of the saved Rigs. If you find that a
certain Rig is much louder or quieter than the
others, you can tweak it here.
Turn the scroll wheel to select a Rig to adjust,
and use the lit Tone Control knob to adjust the
volume.
When you’re done editing these settings and
you back out of the Rig Balancing screen, a “Sav-
ing” message appears on the display for a few
moments as the new settings are saved.
Amp/Cab Linking
This parameter toggles the linking of amplifier
and cabinet models that were historically used
together. With Amp/Cab Linking on, when you
choose certain amps in Rig View, the cabinet
that goes with it will also be chosen. You can
still change the cabinet you want to use later.
Display Contrast
This control allows you to set the contrast of the
LCD display to match your viewing angle or
light conditions.
Knob Display/Action
This screen lets you configure the way knob set-
tings are displayed onscreen, and how they act.
Display
This control lets you see the current positions of
the control knobs as either graphic knobs or as
numeric values. If you choose to display the
controls as knobs, keep in mind that you can see
the exact numeric value of a control temporarily
by turning the knob slightly.
Action
This control lets you choose between the follow-
ing knob behaviors:
Normal Moving a Control knob will cause the
currently assigned setting to immediately follow
the knob’s position.
Latch When a Control knob is positioned differ-
ently than the current value of the assigned con-
trol, the control’s setting will not update until
the knob is swept past the current setting.
Blink
The Tempo button on the front panel of
Eleven Rack can be set to blink in time with the
current Rig tempo. The Blink control toggles
this behavior on and off.
Headphone Volume
This control sets the volume of the Headphone
outputs on Eleven Rack, as an offset from the
Main output volume.
Reset Memory
In this screen, pressing SW1 will reset the mem-
ory of Eleven Rack back to factory specs. All user-
created Rigs and settings will be erased.
You can exit this screen without resetting the
memory by pressing the Edit/Back button.
Firmware Version
On this screen, you can check to see what firm-
ware version is running on your Eleven Rack.