![background image](http://html1.mh-extra.com/html/avid-technology/eazical-ii/eazical-ii_operating-manual_3031392009.webp)
CRANE Co.
280N MIDLAND AVENUE, STE.258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.avidcontrols.com
01/05/2018
TECH-537/ D.W.O. 23142
Page 9 of 21
Figure 2
Mounting for Shaft Option Namur Mount to Keystone 79U or MRP Actuators
4.2
Pneumatic piping:
Single Acting Actuator (Spring Return):
For single acting actuators Outlet Port 2 is to be plugged. Outlet Port 1 is to be piped to the
actuator inlet port that acts against the spring. (Increasing signal causes pressure to increase in
Outlet Port 1 of the positioner).
Double Acting Actuator (Double Return):
For double acting actuators Outlet Port 2 is piped to drive the actuator towards the fail
Position. Outlet Port 1 is piped to drive the actuator away from the fail position.
(Increasing Signal causes pressure to increase in Outlet Port 1 of the positioner and pressure to
Decrease in Outlet Port 2 of the positioner.
Namur
Actuator
Namur
Mounting
Bracket
Namur
Shaft
Remove Mod
Mount Bracket
to expose
Namur Shaft