Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 225 / 282

8 Maintaining Your AirSpeed Multi
Stream
This chapter contains information on how to maintain your AirSpeed Multi Stream system,
including information on how to create a drive image, restore a drive image, rebuild a
database, and replace a hard drive should one fail. This chapter includes the following
sections:
• Reimaging Your System
• Rebuilding a Database
• Replacing Media Drives
• Viewing System Health Status Information
• Accessing the Knowledge Base
Reimaging Your System
This topic provides information on how to use the USB Flash Drive (UFD) provided to
install a factory OS image in the event of a catastrophic failure, or as directed by Avid
Customer Support. After performing this procedure, the system will have a factory OS. You
will need to install the AirSpeed Multi Stream application, and reconfigure the software
settings. For more information, see
“Prerequisites” on page 225 .
Prerequisites
Since restoring your drive image deletes all of your database names, user names, IP
addresses, and configuration settings, it is recommended that you write down any
information that you are likely to use again such as:
• server names
• user names (and passwords)
• database names
• IP addresses
• configuration settings