Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 233 / 282

Rebuilding a Database
233
Rebuilding a Database
This procedure contains information on how to rebuild a database. The rebuild database
process attempts to repair damaged database structures. The rebuild of a database involves
several phases. Before you rebuild a network database, make sure that it is not in use by
somebody else.
n
This function cannot repair clips.
n
Right-click on the Network Tree to remove all locks before rebuilding.
The Rebuild Database Options dialog box is accessed by selecting File > Advanced >
Rebuild Database. A warning message appears. Click OK. Following is an example of the
Rebuild Database Options dialog box.
The check boxes are used to set parameters that affect how the rebuild is performed. Notice
that the Database - Recreate, and Headframes - Create if Missing check boxes are
preselected by default. As a general rule, each check box that is selected slows down the
rebuild, but the rebuild will be more thorough. The choices are described in the following
table.
Rebuild Database Options
Option Description
Icons (low Res)
- Create if Missing This check box is not for Customer use. Checking this box could
result in media loss.