Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 235 / 282

Replacing Media Drives
235
To rebuild a database:
1. Select File > Advanced > Rebuild Database.
A warning message opens. Click OK to close it.
2. Verify that the Database - Recreate, and Headframes - Create if Missing options are
selected. Currently, no other options are supported or recommended for customer use.
3. Click the Rebuild button.
This process takes about 13 minutes to rebuild a database with 1000 clips.
n
If the database you want to rebuild is in use by other workstations, the Database in Use
dialog box will appear. All connected workstations must be disconnected before you can
apply rebuilding functions.
Replacing Media Drives
In the event that one or more of your media drives needs to be replaced, you must obtain
replacement drives and install them in your AirSpeed Multi Stream. Once installed, you
need to re-configure your media drives for RAID 0 striping within Windows.
For more information, see the topic “Configuring Media Drives for RAID 0 Striping” on
page 73 .
Windows XPe Security Update Information
Avid qualifies security updates for Microsoft operating systems in coordination with the
Microsoft monthly security bulletins. For more information regarding this process and the
patches qualified for your Avid product, please go to the following link:
http://avid.com/securityupdate
Viewing System Health Status Information
In the event that you have any issues or failures with the AirSpeed Multi Stream server, use
the Avid Health Monitor to view system health status information. The Avid Health Monitor
is a good tool to have online when you contact Avid Technical Support.
To access the Avid Health Monitor:
1. Select Start > All Programs > Avid > Avid Service Framework > Avid Health Monitor.
The Avid Health Monitor dialog box opens.