PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
34/72
The WDR(Wide Dynamic Range) is a function for dividing an image into several
blocks and correcting blocked-up shadows and blown-out hightlights in
accordance with the intensity diffrence. It enables you to obtain images in which
portions ranging from dark to light can be recognized, even when capturing a
subject with a large intensity difference that is backlit or includes extremely light
portions. The WDR function is supported on 30T model only.
Sens-Up
[AUTO(
2~
60)/OFF]
Sets SENS-UP. This setting activates Slow Shutter function when luminance of
image (signal) is too dark.
It is possible to set up the maximum number of frames piled up one on another by
Slow Shutter function
SSNR
[OFF/LOW/MIDDLE/HIGH]
Sets SSNR. This setting enhances the images by deducting noises when the gain
level of the mages is too high.
Sharpness
[1-31]
Sets image sharpness to enhance pictures.
Day/Night
[AUTO/DAY/NIGHT]
Sets Day&Night mode.
Digital Zoom
[ON/OFF]
Sets the digital zoom functions to ON/OFF. If this is set to OFF, the optical zoom
function runs but the zoom function stops at the end of optical zoom
magnification.
Image Flip
[ON/OFF]
Sets System Image Flip Function to ON/OFF. When this function is set to ON,
flipped images always come out. When the camera is installed as Desktop type, set
to ON to get proper images.
Stabilization
[ON/OFF]
Compensates image vibrations by wind or others. The images with vibrations are
compensated by Digital Zoom function and the image resolution with this function
should be lower than normal image resolution when this function is turned on.
Also this function may not work properly in the following cases.
Dark scene or Low contrast scene
High frequency vibration
During Pan/Tilt/Zoom/Focus moving
During Iris/Shutter/Gain moving
OSD MENU
4