PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
25/72
Pattern
Function
This function is that the camera memorizes the path (mostly curve path) by
the joystick of the controller and revives the trajectory operated by joystick
as closely as possible.
MAX. 4 Patterns are programmable and Maximum 768 communication
commands can be programmed in a pattern.
Setting Patterns
A Pattern can be created by the following methods.
Method 1) <Set Pattern> [Pattern NO.]
The Pattern programming window appears on the monitor as below.
EDIT PATTERN ] 90%
PATTERN RECORDING
[NEAR : SAVE / FAR : CANCEL]
The movement by Joystick can be memorized in a pattern.
To save the recording, press
NEAR
key and to cancel, press
FAR
key.
Method 2) Programming in OSD Menu : See the section How to use OSD Menu.
Running Patterns
Method 1) <Run Pattern> [Pattern NO.]
Method 2) <Go Preset> [Pattern NO. + 130]
ex) Run Pattern 2 : <Run Pattern> [2]
ex) Run Pattern 2 : <Go Preset> [132]
Deleting Patterns
To delete Patterns, enter into OSD menu.
Note) When the system memorizes Patterns, the commands are stored in the momories, not the
positions of Pan/Tilt/Zoom. Hence there might be small differences between the original path and the
revived path by path type of Patterns. Note that it is not a problem in position precision.
OPERATION
3