PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
24/72
Preset
Function
MAX. 209 presets can be configured except the Reserved Presets (Hot Keys).
Camera parameters such as White Balance, Auto Exposure and others can be
set up independently and each preset can have its own parameter values
independently from the other persets. When setting up presets with a
controller, Label should be blank and Video settings should be set to
"GLOBAL" as the default. To change the parameters, enter into OSD menu.
Setting Presets
Set Preset [1~255]
Running Presets
Go Preset [1~255]
Deleting Presets
To delete Presets, enter into OSD menu.
Swing
Function
This function is that the camera moves repetitively between two preset
positions at programmed speeds. When a swing function runs, the camera
moves from the preset assigned as the 1st point to the preset assigned as
the 2nd point in CW(Clockwise) direction. Then the camera moves from the
preset assigned as the 2nd point to the preset assigned as the 1st point in
CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point and the preset assigned as
the 2nd point are same, the camera turns on its axis by 360
in
CW(Clockwise) direction and then it turns back on its axis by 360
in
CCW(Counterclockwise) direction. The Swing speed is defined from 10
/sec
to 180
/sec.
Setting Swings
To set Swing, enter into OSD menu.
Running Swings
Method 1) <Run Pattern> [Swing NO. + 10]
Method 2) <Go Preset> [Swing NO. + 140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
Deleting Swings
To delete Swings, enter into OSD menu.
OPERATION
3