AVGear AVG-UHMS44PRO, Руководство пользователя

Страница: 14 / 37

AVG-UHMS44PRO

All input ports learn EDID data from one output port
Operation: Press “EDID”, “ALL”+“O“ENTER”
Example: All input ports learn EDID data from output 4
Note: Indicators of the pressed buttons will blink green for three times if the
process is successful, then it will turn off. If the process fails, they will be off
immediately.
EDID programming:
There are five types of embedded EDID data. The chart below illustrates the detailed
information of the embedded EDID data:
No. EDID Data
1 1080P 2D 2CH
2 1080P 3D 2CH
3 1080P 2D Multichannel
4 1080P 3D Multichannel
5 3840x2160 2D
（
30Hz
）
Press and hold
“
EDID
” for 3 seconds to enter EDID programming mode, in this
mode, use output buttons 1/2 to switch among the 5 embedded EDID data. Then
press
“
ENTER
” to confirm programming.
Format: Press and hold
“EDID” for 3 seconds, ““OUTPUTS 1/2”+“ENTER”.
Operations:

Invoke embedded EDID data for one input
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status),
““O“ENTER”.
Example: Set
the EDID data of INPUT 2 to the fourth type of embedded EDID
data:
Press (hold for 3 seconds) or to switch to the 4th
EDID data .

Invoke embedded EDID data for all inputs
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status),