AVGear AVG-UHMS44PRO, Руководство пользователя

Страница: 13 / 37

AVG-UHMS44PRO
5. System Operations
5.1. Front Panel Button Control
AVG-UHMS44PRO has convenient front panel button controls. Below is an
introduction to the system operations.
5.1.1. Switching I/O Connection
1. To select one input to an output:
Operation: “input”+““ENTER”
Example: input 1 to output 2
Note: In default status, 4 IR OUT sockets correspond with 4 HDMI INPUTS.
When you select a HDMI input to an output, the corresponding IR OUT will be
switched synchronously.
2. To select an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
3. To select an input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: select input 1 to all outputs
Note: Indicators of the pressed buttons will blink green for three times if the
switching is done, then turn off. If the switching has failed, they will be off
immediately.
5.1.2. EDID Management
AVG-UHMS44PRO features EDID management to maintain compatibility between
all devices. It can be controlled via EDID learning and EDID programming.
EDID Learning (from output):

One input port learns the EDID data of one output port
Operation: Press “EDID”, ““O“ENTER”.
Example: Input 2 learns EDID data from output 4