AVG-TMX44PRO
OUTPUT:
OUTPUT:
All input ports learn EDID data from one output port
Operation: Press “EDID”, “ALL” + “OUTPUTS” + “ENTER”
Example: All input ports learn EDID data from output 4
OUTPUT:
Note:
Indicators of the pressed buttons will blink blue for three times if the
process is successful, then they will turn off. If the process fails, they will turn off
immediately.
5.1.3 EDID programming:
Press and hold
“
EDID
” for 3 seconds to enter EDID programming mode, in this
mode, use output buttons 1/2 to switch among the 5 embedded EDID data. Then
press
“
ENTER
” to confirm programming.
There are five types of embedded EDID data. The chart below illustrates the detailed
information of the embedded EDID data:
No.
EDID Data
1
1920x1080p@60Hz 8-bit 2CH
2
1920x1080p@60Hz 8-bit Multichannel
3
1920x1080p@60Hz 3D 12-bit 2CH
4
1920x1080p@60Hz 3D 12-bit Multichannel
5
3840x2160p@30Hz 8-bit
Operation
: Press and hold
“EDID” for 3 seconds, “INPUTS” + “OUTPUTS 1/2” +
“ENTER”.
Example
: Set the EDID data of INPUT 2 to the forth type of embedded EDID data:
Press
(hold for 3 seconds)
OUTPUT:
or
to switch
to the 4th EDID data
.
