AVG-TMX44PRO
4.4. Connection Procedure
Step 1.
Connect HDMI sources (e.g. BluRay player) to HDMI inputs of the AVG-
TMX44PRO with HDMI cables.
Step 2.
Connect HDBaseT receivers (e.g. AVG-HD300SR) to the HDBaseT
Output ports with Cat 5e/6 cable.
Step 3.
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the AVG-
TMX44PRO or the receivers with HDMI cables
Step 4.
Connect Receiver, Audio Matrix etc. to AUDIO output ports
Step 5.
Connect the RS232 port of your control device (e.g. a PC) to the RS232
port of either the AVG-TMX44PRO or far-end receivers. RS232 signal can
be transmitted bi-directionally between the AVG-TMX44PRO and far-end
receivers.
Step 6.
The AVG-TMX44PRO can receive IR signals transmitted by the included
IR remote via its built-in IR sensor or through an external IR receiver
connected to the IR IN/ IR CONTROL/ COMMON IR port. The IR signal
can be transmitted bi-directionally between the AVG-TMX44PRO and far-
end receivers.
Step 7.
Connect the supplied DC 24V power adapter to the AVG-TMX44PRO.
Note:
Connect HDBaseT ports of TMX44PRO and far-end HDBaseT Receivers with
a straight-through cat cable.
4.5. Connection with a HDBT Receiver
The AVG-TMX44PRO features 4 HDBaseT output ports which support PoH.
Connect the HDBT output ports of the AVG-TMX44PRO to the HDBaseT Receivers
supporting PoH via twisted pair cable. Plug a power supply to the power port of the
AVG-TMX44PRO, the HDBaseT Receivers will be powered via PoH.
