125
messages should be displayed - it is recommended to have the critical errors
and warnings displayed at all times, and decide voluntarily about the
information messages
12.3. Areas and Adapters Profiles
In the Adapters and network areas settings dialogs you can edit setting related to
assigning of defined profiles to specific adapters and referring and respective
networks:
Disable area detection and automatic profile switch - one of the defined
profiles can be assigned to each network interface type, respectively to each
area. If you do not wish to define specific profiles, one common profile defined
during the
Firewall Configuration Wizard
will be used. However, if you
decide to distinguish profiles and assign them to specific adapters and areas,
and later on - for some reason - you want to switch this arrangement
temporarily, tick the Disable area detection and automatic profile switch
option.
List of adapters, areas and assigned profiles - in this list you can find an
overview of detected adapters and areas. To each of them you can assign a
specific profile from the menu of defined profiles (all profiles are primarily
defined within the
Firewall Configuration Wizard
, or later you can create
new profiles in the
Profiles
dialog of the Firewall Settings). To open this
menu, click the respective item in the list of adapters, and select the profile.
