Avery Weigh-Tronix TT-830, Руководство по обслуживанию

Страница: 6 / 50

6
TT-830 Bench Scale Service Manual
Press the TARE key to enter a tare weight, then press
SELECT to see the net display mode.
Press the ZERO key to establish a zero reference. A
center-of-zero icon will be displayed. During motion an M
will appear below the center-of-zero icon.
Press the ESCAPE key to back out of menus or cancel a
numeric entry without accepting the value.
Press the CLEAR to clear values from the display.
Press the ENTER key to enter a keyed in value or accept
a displayed choice.
Press and hold the ON/OFF key for five seconds to turn
the unit off. Press any key to power up the scale.
The numeric keypad is for entering numbers.
Soft keys are so-called because their function is not fixed. Function can
change as the mode of operation changes or as the program for your
particular setup changes.
Their are five soft keys located directly below the display. If the keys are
needed during any operation, a label for each active key appears in the
display directly above. There are only five key labels available at one time
but this does not limit the potential usefulness of these keys. Programs can
be created to enable one key to access another level of operation with five
more key names and functions.
Soft Keys