Avery Weigh-Tronix TT-830, Руководство по обслуживанию

Страница: 14 / 50

14
TT-830 Bench Scale Service Manual
Figure 6 is a flowchart showing what soft keys or choices appear as you
press the soft keys shown in Figure 5.
Figure 6
Soft key flowchart for Configure level
Press the MENU1 soft key to access the following soft key group:
• SCALE Press this key to set display update rate, zero range, print
return to zero, and accumulate return to zero.
• UNITS Use this key to enable/disable units of measure.
• SETPT Use this key to show setpoints, if used.
• SERIAL Use this key to set port #, baud rate, parity, databits,
handshake, mode, and EOM character.
• EXIT Press this key to go back to the previous soft key set.
Following are detailed instructions for setting these parameters.
Under Misc. (print format) in
the flowchart to the right, the
default print format 0 shows
gross, tare and net weights. If
you choose another print
format (1-16) you need to
define the format in SimPoser
and download it to the TT-830.
CONFIGURE-MENU 1 Level
When your changes are
completed, secure and protect
them by changing the seal
status. See Seal in the previ-
ous section