manualshive.com logo in svg

Avery Weigh-Tronix 1040/XL, Инструкция пользователя

Поделиться
Скачать
Avery Weigh-Tronix 1040/XL Скачать руководство пользователя страница 32

32

Model 1040/XL User’s Manual

 Editing Pen Descriptions

Pens

If you enter a number higher
than 100, CAN’t will be dis-
played and the display will
return to the previous display.

Pens are used to track the unloading of finished batched recipes. You can
store unloading data for up to 100 pens. This data is saved and can be
printed. Data saved and printed includes the date, time, pen number, pen
description, weight unloaded and total unloaded.

The default names for pens are PEN.001, PEN.002, etc. Follow these steps
if you want to customize the name to a six (6) character description.

1.

From the Gross mode, enter pen number (example:56), than press and
hold on 

PEN 

key for two beeps (2 sec) then release. . .

PEN.056

 is displayed.

2.

Use the keypad to enter in the description (example: PIG-01). Press the

6(PQR)

 key twice to display..

__ __ __ __ __ P

. See section 

Entering Alphanumeric Characters

3.

Press the 

3(GHI)

 key three times to display. . .

__ __ __ __ P I

   is shown.

4.

Wait three seconds so the display has time to move the 

PI

 to the left

and the flashing cursor will appear to the right. You need to do this on
this keying sequence because 

I 

and 

G

 are on the same key. See section

Entering Alphanumeric Characters

.

Continue keying in characters until 

PIG-01

 is displayed.

5.

Press 

SELECT

. . .

PIG-01

 is displayed, then press 

MENU

 and 

PEN.057

, the next

pen, is displayed.

6.

Repeat steps 2-5 until all pen names have been been properly edited
and press 

MENU 

to scroll through and view all pen descriptions.

To edit the Pen description, display the desired pen and use the keypad
to change the description. If you want to change back to the default
description simply access the desired pen name and press and hold the

ZERO/CLEAR

 key for 2 beeps (2 sec) 

PEN.CLR

 is displayed and then

the next Pen description is shown.

7.

Press 

GROSS 

to return to Gross weighing mode.

Содержание 1040/XL





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды