manualshive.com logo in svg

Avery Weigh-Tronix 1040/XL, Инструкция пользователя

Поделиться
Скачать
Avery Weigh-Tronix 1040/XL Скачать руководство пользователя страница 26

26

Model 1040/XL User’s Manual

VOLUME

(Default = high)

SLEEP

(Default = 0, for off)

When the unit goes to sleep,
the unit will first activate the
audible alarm, and user has 10
seconds to press a key to reset
the SLEEP timer.  If a key
hasn’t been pressed within
these 10 seconds the display
shows SHTDWN, and the unit
shuts off.

The Model 1040 has audible feedback on key presses that can be configured
for OFF, low, medium, and high volume.

1.

From the Gross mode, press and hold the 

MENU 

key for two beeps (2

sec), then release. . .

LIST 

is displayed.

2.

Press the 

MENU 

key repeatedly until 

VOLUME 

is displayed.

3.

Press the 

SELECT 

key. . .

Current setting is shown

4.

Press 

MENU 

repeatedly to scroll through choices. When you choice is

displayed, press 

SELECT

. . .

VOLUME 

is displayed

5.

Press the 

GROSS 

key to return to the Gross weighing mode or press

the 

MENU 

key to move to the next menu item.

The Model 1040 has a sleep mode that will shut the unit off if no keys are
pressed or the weight doesn’t change by more than 1% over the number of
minutes that you enter for the sleep setting.

1.

From the Gross mode, press and hold the 

MENU 

key for two beeps (2

sec), then release. . .

LIST 

is displayed.

 2. Press the 

MENU 

repeatedly until 

SLEEP 

is displayed.

3.

Press the 

SELECT 

key. . .

Current setting is displayed

4.

Use the keypad and enter in the sleep shutoff setting from 0-999
minutes. . .

Entered value is displayed.

5.

Press the 

SELECT 

key. . .

SLEEP 

is displayed. If an invalid entry is attempted, 

CAN’T

 will be

displayed, and the user will need to enter a valid entry from 0-999.

6.

Press the 

GROSS 

key to return to the Gross weighing mode or press

the 

MENU 

key to move to the next menu item.

The Model 1040 allows you to select a language for the display messages
that are spelled on the display, and for all the printouts that are available.
Choose from English, Spanish, German, French, Danish, and Dutch.

1.

From the Gross mode, press and hold the 

MENU 

Key for two beeps (2

sec), then release…

LIST 

is displayed

2.

Press the 

MENU 

key several times until….

NATION 

is displayed

NATION

Содержание 1040/XL





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды