manualshive.com logo in svg

Avery Weigh-Tronix 1040/XL, Инструкция пользователя

Поделиться
Скачать
Avery Weigh-Tronix 1040/XL Скачать руководство пользователя страница 11

11

Model 1040/XL User’s Manual

Before using your new Model 1040 indicator:

• please verify that everything has been properly connected. See

Figures 3-6

• If you are mounting the indicator, see the next section: 

Mounting the

Model 1040

.

• check the scale system to ensure proper units are set (lb, kg)
• verify the system is weighing properly.

The Model 1040 mounts on a quick-detach bracket. Weld or bolt the
quick-detach bracket into place, as follows:

1.

Choose a mounting location that is

• convenient for operation of the indicator, and
• protected from moving parts or from other moving machinery.

2.

Hold the indicator at the proposed mounting location, and verify that
the display is legible and the controls accessible.

3.

Positioning the quick-detach bracket with the wider end at the top,
mark the desired mounting location. If bolting, use the quick-detach
bracket as a template and mark and drill holes.

4.

Weld or bolt the quick-detach bracket at the appropriate location. If
bolting, use double nuts or self-locking nuts to protect both indicator
and machinery.

5.

Insert the indicator bracket into the quick-detach bracket and push it
down into place.

6.

For mobile applications, wrap and twist a strong wire around the
indicator bracket and the quick-detach bracket to stabilize the mount-
ing.

Mounting the
Model 1040

Getting Started

Содержание 1040/XL





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды