manualshive.com logo in svg

Avery Weigh-Tronix 1040/XL, Инструкция пользователя

Поделиться
Скачать
Avery Weigh-Tronix 1040/XL Скачать руководство пользователя страница 17

17

Model 1040/XL User’s Manual

Operational Overview

Menus

Gross Mode and
Power Failures

Data Entry

The following is an operational overview of the 1040/XL indicator.

The indicator has the following menus:

• User menu (no password)
• Test menu (111 Menu)
• Setup menu (covered in the 

Service Manual)

• History menu (covered in the 

Service Manual)

• Factory calibration menu (covered in the 

Service Manual)

The standard mode of operation is the gross mode. The Gross annunciator
will be on and gross weight on the scale will be displayed.

After a power failure, when you power up the indicator you are given the
opportunity to return to the step in any process you may have been in when
the power failure occurred. This is important if you lose power in the middle
of a batch and simply want to return to which ingredient you were loading.

If power is lost during batching of a recipe, the display will show 

RETURN

when power is restored. If you want to exit the recipe process, press the

GROSS

 key. If you want to return to recipe process, press the 

SELECT 

key.

The indicator will return to where it was when power was lost. If you were in
the middle of loading an ingredient and don’t remember what ingredient it
was, press the

 LOAD/UNLOAD

 key to see the ingredient name.

All data entered will become one of the following:

• weight - All weight entered data will be rounded on a standard rounding

scheme to the nearest division size. (Example: If you enter 5002, and
the indicator is counting by 5’s, once the next key is pressed signifying
that it is weight, the display will show and record the entry as 5000).

• Time or Rotation entry
• Id
• Quick print number
• Recipe or Pen number
• Recipe entry (If entering a recipe, all data will be allowed down to 1 lb/

kg. Rounding will be implemented when actually batching or printing
recipes.

Anytime you enter data by mistake, the 

ZERO/CLEAR

 key will clear the data

entry display and you can re-enter the correct data.

Содержание 1040/XL





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды