manualshive.com logo in svg

Avery Dennison AP5.4, Руководство пользователя

Поделиться
Скачать
Avery Dennison AP5.4 Скачать руководство пользователя страница 17

05/09 Rev. 5.02-01

USER MANUAL

Setup & Operation

AP4.4 – AP5.4

17

¯

To stop printing, press the online button.

Message Mode

The printer uses the message mode to signal an error or a particular operating 
status. Message mode indicates that the printer is waiting to quit or for a fault 
to be corrected. When exiting, the printer switches from message mode to of-
fline mode (depending on the error and the progress of the previous process).

Messages are made up of the status number and a brief descriptive text:

The messages 5001 (see above) e.g. occurs, if the printer is set for using la-
belling material with perforation, but continuous form material without perfora-
tion is inserted. In this example, the printer will continue to feed the material 
for a few seconds before it finally sends an error message.

More information on message reports and a detailed list of all messages can 
be found in topic section 

Status Messages 

.

Standalone Mode

(For AP 5.4 only)

In standalone mode, the print jobs are not transmitted via a data cable, but are 
stored on a CF-Card. From there, they can be selected using the printer dis-
play or an keyboard connected to the printer.

For detailed information about using the standalone mode, refer to topic 
section 

Advanced Applications 

.

Status            5001
No punch detected

Содержание AP5.4



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды