Avery Dennison 686 HT, Руководство пользователя

Страница: 41 / 121

Users Manual Model 686 / 686 HT Control Panel Operation
• •• •
39
T O P R E F L N O T O V E R M A R K
V A L U E : 0 0 0 N E W V A L U E : 0 0 0
This screen follows the "TOP REFL OVER MARK" screen. Place the stock under
the sensor so that the stock is under the sensor but the reflective mark is not under
the sensor and when NEW VALUE is at is smallest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "BOT REFL OVER
MARK" screen. Pressing the EXIT / Up Arrow key will take the user back to the
"HOME" screen.
B O T R E F L O V E R M A R K
V A L U E : 0 0 0 N E W V A L U E : 0 0 0
This screen follows the "TOP REFL NOT OVER MARK" screen. Place the stock
over the sensor so that the reflective mark is over the sensor and when NEW
VALUE is at is largest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "BOT REFL NOT
OVER MARK" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
B O T R E F L N O T O V E R M A R K
V A L U E : 0 0 0 N E W V A L U E : 0 0 0
This screen follows the "BOT REFL OVER MARK" screen. Place the stock over
the sensor so that the stock is over the sensor but the reflective mark is not over the
sensor and when NEW VALUE is at is smallest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "STACKER
BLOCKED" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
S T A C K E R B L O C K E D
V A L U E : 0 0 0 N E W V A L U E : 0 0 0
This screen follows the "BOT REFL NOT OVER MARK" screen. Place the stock in
the stacker jam sensor so that the stock is within the sensor site path and when NEW
VALUE is at is highest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user to the "STACKER NOT
BLOCKED" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
S T A C K E R N O T B L O C K E D
V A L U E : 0 0 0 N E W V A L U E : 0 0 0
This screen follows the "STACKER BLOCKED" screen. Remove any stock from
the stacker jam sensor so that no stock is within the sensor site path and when NEW
VALUE is at is lowest value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user back to the "HOLE / SLOT
IN SENSOR" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.