User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev.
2.14
35
Technical Specification TDI
Print technology
Thermal-and Thermal Transfer Print
Print head
„Near Edge Type“ print head, high resolution, fast, with integrated
temperature control.
Print speed
100 up to 250 mm/s in steps of 25,4 mm/s (1 “/s)
Resolution
12 Dots/mm (300 dpi)
Effective print width
128 mm
Imprint exactness
Up to 100 mm label length: +/- 1 mm in X and Y direction
More than 100 mm label length: 1% of the label length
Label size
Width: 25,2 (short tag 50mm) up to 154 mm
Length: 105 mm (short tag 50mm) up to ca. 350mm
Label length
105 mm up to max. printing length (standard device)
50 mm up to max. printing length (Short Tag option)
The max. printing length depends on the following points:
–
Firmware
intalled to the printer (standard or extended, furthermore of
the version of the respective firmware)
–
Use of
bar code cards
–
Use
of
image cards
Depending on the combination of firmware, bar code card and image
card results a different maximum print length.
Firmware
Plug-in card
Max. printing
length
none
301 mm (324 mm*)
Standard (1H..)
Bar code card
242 mm
none
245 mm
1 x 1 MB S-RAM
339 mm
1 x 2 MB S-RAM
679 mm
2 x 2 MB S-RAM
1359 mm
Extended (1X..)
Bar code card
197 mm
Tab. 1: The max. printing length can be extended by aid of S-RAM cards; assuming
that the special "extended firmware" (code 1X..) is installed. This firmware
takes more memory space than the standard firmware, that´s why the max.
printing length with extended firmware and without plugged-in S-RAM card
is even lower than with standard firmware.
*) with spooler set to 8 KB (standard: 65 KB)
¯
Be aware, that the max. printing length may vary from one firmware
version to the next. Adding features to the printer means often taking
away some millimeters of printing length from the image buffer!
P
For detailed information on the different firmware versions refer to the
service manual, topic section "Firmware", "Firmware Versions".
P
For details about applying plug-in cards refer to the cards manual.
