User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev.
2.14
16
•
Pull ribbon upward and simultaneously move it towards printer.
•
Guide ribbon around feed roller and attach it to ribbon core in anticlockwise direction
(ribbon may be folded so that adhesive part at start of ribbon can be used).
•
-TTX 650/ LION / S 65 only-
By simultaneous depression of the (ON/OFFLINE)-and (FF)-keys, material and ribbon can
be advanced until perfect unwinding of ribbon is warranted.
•
-TDI/XXTREME / S TDI only-
By pressing 2x the CUT key at OFFLINE mode at the display appears FOIL.
Subsequently by depressing the ON/OFFLINE key, the ribbon may be fed. Leave operation
by pressing FFED key 2 times back to OFFLINE mode.
Attention:
Fingers, hair, clothing, jewellery, etc. may be caught by and get into the unit in
the ribbon feed section!
