User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev.
2.14
17
•
- only for TTX 1050
Similar to the media unwind – the ribbon mechanic is supported as well. Open the handle to
remove / change ribbon and close the support again.
Adjustment of ribbon unwind rewind tension
The torque of ribbon unwind and rewind mandrels are adjustable by means of the red
hexagon pin .
The ribbon should run free of wrinkles respectively should not be stretched (especially at
drum section) over the whole run from roll to roll.
Increase
of torque at unwind rewind mandrel
Ribbon must not be stretched
Decrease
of torque at unwind rewind mandrel
Ribbon must not have wrinkle
The factory adjustment covers a wide range of ribbon width which is the main factor for
the torque. Use of very narrow and very wide ribbon however may need a readjustment.
