avertX HD90IR, Руководство пользователя

Страница: 25 / 37

31626AA 25
Triggered Action
You can specify which actions the camera should take when motion is
detected.
•
Send Alarm Message by FTP/E-Mail – Select to send an
alarm message to a configured FTP and/or E-Mail address
when motion is detected. When sending to email, the alarm
notification is text only. When sending to FTP, the alarm
notification will upload a text file to the FTP location.
•
Upload Image by FTP – Select to assign an FTP site and
configure various parameters as shown in the figure below.
When motion is detected, event images will be uploaded to the
appointed FTP site.
Upload Image by E-Mail – Select to assign an e-mail address and
configure various parameters as shown in the figure below. When
motion is detected, event images will be sent to the appointed e-mail
address.
Note
Make sure SMTP or FTP configuration has been completed.
See the Mail and FTP sections for more information.
File Name – Enter a file name in the box, ex. image.jpg. The uploaded
image’s file name format can be set in this section. Please select the
one that meets your requirements.
•
Add date/ time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
•
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
•
Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the value entered in this box.
For example, if the setting is up to “10,” the file name will start
from 00, end at 10, and then start all over again.
•
Overwrite – The original image on the FTP site will be
overwritten by the new uploaded file with a static filename.