avertX HD90IR, Руководство пользователя

Страница: 16 / 37

16
CONNECTING TO THE
CAMERA
1. Locate the camera on the IP Finder list.
2. Double-click the camera to open the Viewer software in your web
browser.
3. Log in to the camera with the appropriate User Name and
Password.
Note
The default User name is Admin and the default Password
is1234. The username and password are case sensitive
Resetting the Camera
If it is necessary to reset the camera to the factory default settings, hold
down the Reset button (see
Camera Overview ) for 30 seconds. This will
return all settings, including network setup, to the factory default. The IP
address of the camera will return to 192.168.0.250.
Administrator/User Privileges
The Administrator account has the authority to configure the IP camera
and authorize users’ access to the camera. The User accounts have
access to the camera with limited authority.
Connecting a Stream
AvertX IP cameras are optimized for use with AvertX HDIP recorders,
but you can also connect to your AvertX IP cameras using third party
software like VLC media player (http://www.videolan.org).
To connect the camera you may need to provide the stream URL. All
AvertX IP cameras are capable of delivering two RTSP streams, as well
as streaming MJPEG over HTTP. The stream URLs are listed below.
rtsp://<ip address>/mjpeg
rtsp://<ip address>/mpeg4
rtsp://<ipaddress>/h264
http://<ipaddress>:8008
The MJPEG over HTTP stream is identified by a port number. The
default port is 8008; this port can be configured in the cameras
Network
page: