avertX HD80, Руководство пользователя

Страница: 22 / 26

22
When motion detection is activated, the Motion pop-up window will
open.
When motion is detected, the signals will be displayed on the Motion
window as shown below.
Motion Detection
Turn motion detection on or off. The default setting is Off.
Motion Detection Setting
•
Sampling pixel interval [1-10] – Default value is 10, which
means system will take one sampling pixel for every 10 pixels.
•
Detection level [1-100] – Default detection level is 10. This
item sets the detection level for each sampling pixel; the
smaller the value, the more sensitive it is.
•
Sensitivity level [1-100] – The default sensitivity level is 80,
which means if 20% or more sampling pixels are detected as
changing, the system will detect motion. The bigger the value,
the more sensitive it is. As the sensitivity value is increased,
the red horizontal line in the motion indication window will be
lowered accordingly.
•
Time interval (sec) [0-7200] – The default interval is 10. The
value is the interval between each detected motion event.
Software Upgrade
Use the Software Upgrade page to view the current version of camera
software, and upgrade the software if necessary.