avertX HD80, Руководство пользователя

Страница: 19 / 26

32335AA 19
When using static IP address to log in to the IP Camera, you can
access it either through the AvertX IP Finder software or type the IP
address directly in the Address bar of your internet browser.
General
•
IP address – The IP Address is necessary for network
identification.
•
Subnet mask – Used to determine if the destination is in the
same subnet. The default value is 255.255.255.0.
•
Default gateway – Used to forward frames to destinations in
different subnets or for internet access.
•
Primary DNS – T he primary domain name server that
translates hostnames into IP addresses. This is usually the
gateway or router address.
•
Secondary DNS – A secondary domain name server that
backups the primary DNS.
Advanced
•
Web Server port – Defines the port that Internet Explorer uses
to connect over the web and view video. If this port is changed
then the new port must be defined when attempting to web
connect (ex: if your camera’s IP address is 192.168.0.100 and
you change the web port to 8001, then you must type
http://192.168.0.100:8001 in your browser).
•
RTSP port – The default RTSP port is 554; setting range:
1024 ~65535.
•
MJPEG over HTTP port – The default HTTP Port is 8008;
setting range: 1024 ~65535.
Note
The MJPEG over HTTP port must not be the same as the web
server port.
Streaming
On the Streaming tab, you can configure specific video resolution, video
compression mode, and video protocol and audio transmission mode.
Streaming Settings
Your AvertX IP camera can transmit two streams of video at the same
time. One stream can be in high definition for recording, and the other
can be a lower resolution used for live display. By using dual streams,
you can display more cameras on the monitor of your recorder without
taxing the CPU.
Resolution – Set the resolution for each stream.
GOP – Set the Group of Pictures (GOP) size for each stream. This
setting can affect image quality and bandwidth. Please consult with
technical support before changing this setting.
Bit Rate – Set the data transmission speed for your camera. A lower bit
rate will result lower image quality but a smaller file size and more
bandwidth availability.
Frame Rate – Set the frame rate of each stream. A lower frame rate will
result in more bandwidth availability.