37601AA
37
o
Night
: The camera provides high-quality black and white images using the existing
light.
o
Auto:
The camera outputs the optimum images according to the light condition. In
this mode, the camera can switch between night mode and day mode automatically.
•
Sensitivity
ranges from 0 to 7, the higher the value is, the easier the mode switches.
•
Filtering Time
refers to the interval time between the day/night switch. You can set it from 5s
to 120s.
•
Scheduled-Switch:
Set the start time and the end time to define the duration for day/night
mode.
•
Smart Supplement Light/Mode:
Set the supplement light as
On + Auto
,
On + Manual,
or
OFF
.
•
Auto
- Supplement light changes according to the actual luminance.
o
For example, if the current scene is bright enough, then the supplement light adjusts
itself to lower power; and if the scene is not bright enough, the light adjusts itself to
higher power.
•
Manual
- Adjust the supplemental light by adjusting the distance.
o
Lower value indicates the object is closer to the camera; the value increases as the
object distance increases.
Backlight Settings
•
BLC Area:
An object against strong backlight will be too dark to be seen clearly. BLC adjusts
light around the object to improve visibility. OFF, Up, Down, Left, Right, and Center are
available options.
Note:
WDR must be set to OFF to access BLC Area.
•
WDR:
Wide Dynamic Range can be used when there is a combination of bright areas and
dark areas in the same scene.
•
HLC:
High Light Compression can be used when there are strong lights in the scene
affecting the image quality.
