37601AA
15
PRO TIP:
Use the AvertX Connect mobile app to view the camera while adjusting view.
NOTICE:
AvertX recommends sealing the opening at the wall and at the base of the camera with
silicone caulking.
For best IR Night Vision performance:
Be aware of surfaces that can cause IR light to reflect into the camera.
•
Reflective or light-colored surfaces and objects close to the camera can reflect IR light
back into the camera.
o
Remove the reflective or light-colored surfaces.
o
Cover the reflecting surfaces with a non-reflective material (non-reflective
tape, dark paint)
o
Mount the camera on a nearby wall using a mounting bracket.
Resetting the Camera
Use the reset button to restore the factory default settings.
To reset your camera:
1. Disconnect the cat5e cable from the camera for 30 seconds.
2. Hold the reset button down while reconnecting cat5e and continue holding the reset button for 30
seconds after reconnecting.
3. Allow 2 minutes before attempting to rediscover camera.
Cleaning the Lens Cover
The Lens Cover of the AVX-HD119IR is extremely durable but can be damaged if cleaned
improperly.
To clean the lens cover:
•
To clean dust or loose dirt, use compressed air.
•
To clean smudges or stuck on dirt, use warm water with a few drops of dish soap and a
clean microfiber cloth.
CAUTION:
Do not use solvents, paper towels, newspaper, or other rough materials to clean the lens
cover. This can scratch the lens cover and cause IR distortion.
