49
Selecting a Channel
To select a channel:
1. Click
to open the
Numeric Panel
.
2. There are a number of ways to select a channel:
•
Click on the
Numeric buttons
to select a channel.
•
Click the
Channel Up/Down
button until you reach your
desired channel.
OR,
•
Use the
numeric keys
on your keyboard to select a channel.
Selecting a Radio Frequency
To select a radio frequency:
1. Click
the
Channel
button
. The button then changes to the
Frequency
button
.
2. There are a number of ways to select a radio frequency:
•
Click the
Numeric buttons
on the Numeric Panel.
•
Click the
Tuning (-)/(+)
button to
increase/decrease the radio
frequency.
OR,
•
Use the
numeric keys
on your keyboard to enter a radio
frequency.
You can save the selected radio frequency to a channel. Refer to the
section titled
Saving a Radio Frequency to a Channel
for details.
NOTE:
When selecting a radio frequency, be sure that it is within the
acceptable range of FM radio frequencies in your area. If you entered a
frequency which is out of range, the
AVerTV
application will
disregard this invalid frequency. The application will then
automatically tune the FM radio back to the previous frequency.
