AVERATEC Voya 350, Руководство пользователя

Страница: 6 / 28

v
Startup
Be sure the battery has been properly installed. Press and hold the power button for about
two seconds to turn on the power. Select: NAVIGATION or SETUP. Use the directional pad or tap
the icon using the stylus or your finger to select a function.
NAVIGATION: Loads the navigation program and map screen
SETUP: System adjustments and operation instructions

Backlight (adjust setting)

Power (Battery level and Battery On/Off setting)

Calibration

System (Internal Memory and SD Storage)
Whistler VOYA 350
Using the Stylus
The stylus is an optional tool instead of using a finger to tap the screen for operating this unit. Use
the stylus to select icons/items on the screen or scroll around the map. The stylus is concealed in
the pen slot on the top; pull out and extend for easy usage. Replace the stylus after use to
prevent it from being misplaced.
Functions of the stylus:
Selection :
Use the stylus point to select items and functions onscreen. On the map display, select the street
or indicators on the map for details of building or road names.
Drag :
Touch the stylus point on the screen and drag to scroll around the map for a specific location or
landmarks.
Select and hold :
Select the item/icon and hold for a second to show the floating context menu, and then select the
item to be executed.
Under normal operating conditions, the last satellite lock computed before the unit was turned off
is stored into memory and will be used as the reference the next time the unit is turned on. If you
travel for more than 500 miles with the unit turned off, it will still have the reference point from the
original position, but it may be too inaccurate to be useful. In this case you may want to perform a
GPS reset.
Whistler VOYA 350
System Reset
Reset the unit if any of the following situations occur:
1. Heavy lag experienced with screen refresh or operations, resulting in an inoperable
system.
2. Cannot turn off the system with power button.
3. No response with any selection on the screen.
Use the tip of the stylus and insert into the reset switch on top of the unit. The system will
immediately reset and reboot. Once the main menu is displayed, the unit is ready to use.