AVERATEC 4100 Скачать руководство пользователя

Страница: 64 / 69

■

Appendix B Agency Regulatory Notices

of the power cords listed below. To purchase a power cord (including one for a country not listed below) or a

replacement ac adapter, contact your local dealer.

U.S. and Canada

The cord set must be UL-Listed and CSA-Certified or C-UL Listed.

The minimum specifications for the flexible cord are (1) No. 18 AWG, (2) Type SJ, and (3) 3-conductor.

The cord set must have a rated current capacity of at least 10 A.

The attachment plug must be an earth-grounding type with a NEMA 5-15P (15A, 125V) or NEMA 6-15P

(15 A, 250V) configuration.

Japan

All components of the cord set (cord, connector, and plug) must bear a `PSE` mark and registration

number in accordance with the Japanese Dentori Law.

The minimum specification for the flexible cord are: (1) 0.75 mm

conductors, (2) Type VCT or VCTF, and

(3) 3-conductor.

The cord set must have minimum rated current capacity of 7 A.

The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A,

125 VAC) configuration.

Other Countries

The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific

country. Acceptable agencies are:

BSI (UK)

OVE (Australia)

CEBEC (Belgium)

SEMKO (Sweden)

FIMKO (Finland)

DEMKO (Denmark)

NEMKO (Norway)

SETI (Finland)

EANSW (Australia)

SEV (Switzerland)

IMQ (Italy)

UTE (France)

CCC (China)

PSB (Singapore)

PSE (Japan)

BSMI (Taiwan)

B (Polish)

VDE (Germany)

SASO (Saudi Arabia)

The flexible cord must be of a HAR (harmonized) type HO5VV-F 3-conductor cord with a minimum

conductor size of 0.03 square inches.

The minimum specification for the flexible cord for Class II product are: (1) 2X0.75 mm

conductors, (2)

2-conductor cord.

The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250 VAC.

CAUTION: THIS MODEL IS DESIGNED TO USE WITH THE FLLOWING AC ADAPTER MODEL ONLY
Manufacturer: LITE-ON ELECTRONICS, INC
Model:

PA-1650-01 (65W)

Telephone lines requirement

The appropriate utilization of 26AWG telephone line cord on unit.

CAUTION: Always disconnect all telephone lines from the wall outlet before servicing or disassembling this

equipment.

CAUTION: To reduce the risk of fire, use only No. 26AWG or larger telecommunication line cord.

Battery Pack Safety

The battery pack is intended to use only with this notebook.

Содержание 4100






































































Результаты поиска

Содержание 4100

Отзывы:

Похожие инструкции для 4100

Бренды по названию

Популярные бренды

AVERATEC 4100, Руководство пользователя

Результаты поиска

Содержание 4100

Отзывы:

Похожие инструкции для 4100

Бренды по названию

Популярные бренды