Avenview HDM-C6IPX-SET, Руководство пользователя

Страница: 10 / 18

www.avenview.com
Page 7
2.3 DEvICE DESCRIpTION & lAyOuT
This product is SDFNDJHGDVDVHWZKLFKLQFOXGHV a Transmitter and a Receiver.
2.3.1 Front Panel & Rear Panel (Transmitter, HDM-C6IP ; -S)
2
CAT5E/6 OUT :
plug in a Cat-5E/6 cable to link and send
data (video and audio) to the Reciever unit or network switch.
1 +5V DC:
Connect to the 5v DC power supply
Power LED will light BLUE .
4 LINK LED:
When connected to RX or network switch the
LED will light GREEN.
2.3.2 Front Panel & Rear Panel (Receiver, HDM-C6IP ; -R)
1
2
3 4
3 DATA LED:
When data is transmitting from the
source the led will continuously flash YELLOW.
5 RESET :
To rest the unit when no link is established 6 HDMI IN :
Connect to HDMI source Max 35ft via HDMI Cable
7 IR :
Plug the IR Blaster cable for IR signal being recieved. Place IR Blaster within direct site of the device being controlled
2
CAT5E/6 OUT: Plug in a Cat-5E/6 cable to link and receive
data (video and audio) IURPWKHVHQGHUXQLW or network switch.
1 +5V DC: Connect to the 5V DC power supply
Power LED will light BLUE.
3 DATA LED: When data is transmitting from the
source the led will continuously flash YELLOW.
5 RESET :
To rest the unit when no link is established
4 LINK LED:
When connected to RX or network switch the LED
will light GREEN .
6 HDMI OUT :
Connect to HDMI display Max 35ft via HDMI Cable
7 IR IN :
Plug the IR Extender cable for IR signal being received. Place IR Extender within direct line of site with the IR Remote.
5 6 7
5 6
7
1
2 3 4
Important
Pl ease do not connect the HDM-C6IPX-SET to a POE network switch this will damage and the
units will be come non functional.