Avenview HDM-C6IPX-SET, Руководство пользователя

Страница: 6 / 18

www.avenview.com
Page 3
2. INTRODuCTION
HDM-C6Ip X -SET, HDMI extender set is an upgraded version of Avenview's popular HDM-C6IP-SET designed to provide an extra
distance, extra IR support and the main difference it is network friendly - can be added to your exsiting network. Having a few years
experience with HDMI over IP we have engineered a newer chipset providing extra PPI in resolution and lower bandwidth . So the
user can e xtend any HD display with the resolutions of 1080p/60Hz up to 3 94 feet (1 20 meters) away from your HDMI or DvI-D
source. Thanks to the use of the TCp/Ip protocol, you can transfer your high-definition video over an y existing TCp/Ip network. See
below three examples:
A: The Tx and Rx units can extend 1 20 meters over a single CAT5/6 cable connection point to point.
B: The Tx can be connected to a Gigabit switch to establish a Ip address therefore sending 1080p video signals to multiple
Rx connected to the Gigabit switch and the HDMI displays.
C: Multiple Tx’s can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p video
signals to Rx connected to the Gigabit switch to show different sources on the HDMI displays.
• Extends HDMI up to 120m over single CAT5E/6
• Supports HDMI, EDID, Support HDCp
• Supports resolution HDTv / 1080pp/60Hz, vesa (1920 x 1080)
• Supporting the point to point transmission function currently which can be expanded to the multi-point to point
transmission function.
•
Requires a managed Gigabit switch with vlAN/IGMp support to have a soultion with multiple sources (Transmitters).
Standard Gigabit switch can only support one transmitter.
• The managed switch must support port based IEEE 802.1Q vlAN, IGMp, and to allow duplicate Ip addresses across
the vlAN domains.
• Each vlAN acts as independent HDMI over Ip Channel on the network.
•
Number of Tx and Rx that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch
10/1000).
• Unm anaged switches can be cascaded up to 3 l ayer network , allowing the farthest display to be located up to 394
meters away from the source device. Each receiver can be located up to 1 20 meters away from each switch .
• uses H.264 technology to process image compression on a fixed bandwidth.