8. TROUBLESHOOTING
No Power in the VCR
Check the wiring to the battery. The Red wire of the RT-195 SW should be connected to the
positive terminal through a 3A fuse. The black wire should connect with negative terminal
of the battery.
Check the fuse. If the fuse blown, find out why the fuse blew and then replace it.
Make sure the white wire connect to the ignition and ignition switch is on. If the VCR pow-
ers up when the temporary switch is pressed, the ignition switch connection may be faulty.
Start the engine to make sure the battery voltage is high enough to power up the VCR.
No Picture on the monitor
Check the Video camera and monitor connection with the VCR. If the camera equipped
with the power indicator make sure the indicator is on.
Start the engine to make sure the battery voltage is high enough to power the VCR.
No Picture or fuzzy but audio is clear
The head may require cleaning. Use a cleaning tape to clean VCR head. Replace all the
worn or dirty tapes.
VCR will not Record
Make sure that video tape is not write procteted.
Start the engine to make sure the battery voltage is high enough to power the VCR.
Power light is blinking
The VCR has detected a faulty or jammed tape. Try to unjam the tape and remove it from
VCR. Be careful not to demage the VCR. Do not poke screw drivers or other tools into the
VCR.
Содержание RT-195-SW
Страница 1: ...RT 195 SW MOBILE VIDEO CASSETTE RECORDER NTSC PAL OPERATION MANUAL VHS ...
Страница 2: ......