AVE RT-195-SW, Руководство по эксплуатации

Страница: 26 / 33

VCR Status
VCR Status if on displays all the VCR operating modes on the screen. Follow the procedure to
turn VCR Status On/Off.
1 Under the Display setting place the cursor in front of VCR Status.
2 Press the “F.F” button to make “VCR Status” a selection.
3 Press “+” or “-” button to turn VCR Status either “ON” or “OFF”.
4 After making selection press “F.F” button again.
5 Exit out from all the menus to activate the selection.
Input Voltage
RT-195- SW has an option to display the input voltage on the screen. You can turn off or on
the voltage display from the display settings. A “LOW VOLTAGE” message will be start flashing
on the screen if the input voltage is less than 9V. If the voltage is less than 9 V and cassette is out
then “CASS OUT” message will be start flashing but VCR will not accept the tape. Follow the steps
to turning the voltage display on or off.
1 Under the main menu place the cursor in front of Display Setting and press the “F.F”
button.
2 Now place the cursor in front of Input Voltage and press “F.F” button.
3 Press the “+” or “-” button to select “ON” or “OFF”.
4 Exit out from the programming mode to activate the selection.
Temprature
A built in temprature sensor keep tract of the internal temprature of RT-195-SW. You can view
the internal temprature by enabling the temprature display under the display setting menu. If the
temprature goes higher than 90 F then the Fan Out put is activated (active low). If the temprature
goes lower than 40 F then the Heater output is activated (active low). If temprature goes less than 32
F then the temprature will be turned off. Follow the steps to enable to temprature display on the
screen.
1 Under the main menu place the cursor in front of Display settings and press “F.F”
button.
2 Place the cursor in front of Temprature and press the “F.F” button.
3 Press the “+” or “-” button to select “ON” or “OFF” button.
4 Exit from the programming mode to activate the selection.