1.
Descriptions and material for buildin
The DIY kit contains:
•
PCB
•
L-Bracket
•
Face plate (with screws, bolts and standoffs)
•
INPUT and OUT transformers (TR2622 and TR2623)
•
DOA PCB (or full DOA DIY Kit)
•
T-Pad 600ohm attenuator
•
Two old style knobs (incl. 6 colored inserts)
All parts are marked on PCB. This includes two markings
These parts you can find in BOM here
What you will need for build:
•
soldering station
•
basic understanding of component
•
DIGITAL MULTIMETER to check VALUE of capacitors and
resistors.
•
You can also use a table with resistor color codes, which
can be found here:
resistor color code information>>>>
All capacitors (electrolytic, ceramic, film) are clearly labled, but you may al
check these values with a digital MULTIMETER
Electrolytic capacitor:
Ceramic capacitor:
MIC PREAMP MP36
©
2017 AVDAUDIO.COM
Descriptions and material for building
Face plate (with screws, bolts and standoffs)
INPUT and OUT transformers (TR2622 and TR2623)
DOA PCB (or full DOA DIY Kit)
Pad 600ohm attenuator
Two old style knobs (incl. 6 colored inserts) (in oldest versions)
All parts are marked on PCB. This includes two markings – NAME and VALUE
parts you can find in BOM here
download MP36 BOM>>>
What you will need for build:
basic understanding of components
DIGITAL MULTIMETER to check VALUE of capacitors and
You can also use a table with resistor color codes, which
resistor color code information>>>>
All capacitors (electrolytic, ceramic, film) are clearly labled, but you may al
check these values with a digital MULTIMETER!
Film capacitor:
MIC PREAMP MP36
AVDAUDIO.COM
versions)
NAME and VALUE..
All capacitors (electrolytic, ceramic, film) are clearly labled, but you may also