manualshive.com logo in svg

Avaya Virtual Services Platform 7200 Series, Инструкция по установке

Поделиться
Скачать
Avaya Virtual Services Platform 7200 Series Скачать руководство пользователя страница 11

VSP 7200 Series

Description

Part numbers

Important:

Make sure the air flow direction of your 

power supplies

 and 

fan modules

 match the same direction

(either front-to-back or back-to-front).

12 volt redundant fan module

The VSP 7200 comes with three 12–V fan
modules for either front-to-back or back-to-
front air flow switch cooling.

EC7200BTF-E6 —
back–to–front fan
modules (includes three
fan module kits)

EC7200FTB-E6 — front-
to-back fan modules
(includes three fan
module kits)

Universal Slide Rack Mount Kit (300mm-900mm)

Slide Rack Mount Kit (300mm–
900mm)

The optional rack mount kit allows a switch to
be installed in a four post rack with depths
between 300mm and 900mm. It is designed
for use on the VSP 7200, VSP 8200 and VSP
8400.

EC8011002-E6

Note:

The universal slide rack mount kit is optional and must be ordered separately. VSP 7200, VSP 8200
and VSP 8400 ship with rack mount brackets. When using rack mount brackets on VSP 8200 and VSP
8400, Avaya recommends the use of a shelf to provide additional support.

Compatible transceivers

Important:

Avaya recommends using Avaya-branded SFP, SFP+, and QSFP+ transceivers as they have

been through extensive qualification and testing. Avaya will not be responsible for issues related

to non-Avaya branded transceivers.

• The VSP 7200 Series operates in forgiving mode for SFP transceivers, which means that

the switch will bring up the port operationally when using non-Avaya SFP transceivers.

Avaya does not provide support for operational issues related to these SFPs, but they will

operate and the port link will come up. The switch logs the device as an unsupported or

unknown device.

• The VSP 7200 Series operates in strict mode for some SFP+ and QSFP+ transceivers,

which means that the switch will not bring the port up operationally when using non-Avaya

SFP+ or QSFP+ transceivers. For coarse wave digital multiplexing (CWDM) and dense

wave digital multiplexing (DWDM) SFP+ transceivers, the switch operates in forgiving

mode and will bring up the port operationally when using non-Avaya SFP+ transceivers of

these types.

• The VSP 7200 Series operates in forgiving mode for SFP+ and QSFP+ direct attached

cables, which means that the switch will bring up the port operationally when using Non-

Avaya direct attached cables. Avaya does not provide support for operational issues

related to these DACs, but they will operate and the port link will come up.

Hardware models for VSP 7200 Series

November 2016

Installing the Avaya VSP 7200 Series

11

Comments on this document? [email protected]

Содержание Virtual Services Platform 7200 Series




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды