manualshive.com logo in svg

Avaya S8730, Руководство по эксплуатации, Страница: 51 / 64

Поделиться
Скачать
Avaya S8730 Скачать руководство пользователя страница 51

7. Restore power to the server.

8. Verify that the power supply LED is green.

9. Verify that the front panel external health LED is green.

Related topics:

Shutting down the MAS

 on page 14

Shutting down the MSS 

 on page 15

Restoring power to the server

 on page 19

Replacing a duplicate power supply

It is not necessary to power down the server to replace a power supply in a server with a

duplicate power supply.

 Warning:

To reduce the risk of personal injury from hot surfaces, allow the power supply to cool before

touching it.

 Caution:

To prevent improper cooling and thermal damage, do not operate the server unless all bays

are populated with either a component or a blank.

1. Remove the power cord from the defective power supply.

2. Press the release tab on the power supply with your thumb.

Replacing a duplicate power supply

Maintaining the Avaya S8730 Server for Modular Messaging

June 2009     51

Содержание S8730

































































Отзывы:

Нет отзывов