Avaya S8730 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 64

Avaya S8730 Скачать руководство пользователя страница 19

Restoring power to the server

The following graphic illustrates the S8730 server with two power supplies. Models 03 and 04

ship with a single power supply; model 05 ships with the illustrated duplicate power supply.

1. Plug one end of the power cord into the back of the server and connect the power

cord anchor to the handle of the power supply.

2. Plug the other end of the power cord into the UPS.

3. If the server does not start automatically within 15 seconds of the power cord being

connected, turn the server on by pressing the power button on the front of the server.

4. If the server still does not start, verify that the server has AC power. Check the UPS

settings, and that the UPS is receiving AC power.
For more information about troubleshooting power problems, see

Installing the

Avaya S8730 Server

.

Restoring power to the server

Maintaining the Avaya S8730 Server for Modular Messaging

June 2009 19

«
...
17
18
19
20
21
...
»

Содержание S8730

































































Отзывы:

Нет отзывов