Avaya S8400, Установка и настройка, Страница: 75 / 80

Troubleshooting the configuration of the media server hardware
Installing and Configuring the Avaya S8400 Media Server February 2007
75
Cannot access the
media server
remotely
●
Ensure that in the LAN security settings “input to server” is
checked for SSH (Linux commands), https (Web access), and
def-sat (SAT commands access). Change the LAN security
settings on the Web interface with a direct connection to the
media server.
The LED display on
SIPI is flashing
●
An IP address is not assigned to the SIPI LED (static IP
addressing).
Cannot access the
SIPI for static
addressing
●
Ensure that you are plugged into the Services (top) port on the
SIPI.
●
Ensure that the ARP cache is cleared on the Services laptop
computer. In an MS-DOS command window, type
arp -d
192.11.13.6
and press Enter .
No “V” shows on the
SIPI LED
●
The SIPI is not connected to the Ethernet switch or the network.
Connect a cross-over cable between the RJ45 SIPI adapter and
Eth-A on the S8400 adapter, or connectcable to the bottom port
on the faceplate and to the Ethernet switch or the customer
network.
●
The “V” on the SIPI
LED is not filled in
●
An IP address is not assigned to the SIPI.
●
The SIPI is not administered.
The system
generates an alarm
when first connect to
SIPI
●
The SIPI does not have the current firmware. Upgrade the
firmware.
Troubleshooting the configuration of the media server hardware (continued)
Problem Possible solution
2 of 2