Avaya S8400, Установка и настройка, Страница: 40 / 80

Chapter 5: IP interface translations
40
Installing and Configuring the Avaya S8400 Media Server February 2007
2. In the Host field, enter the IP address for the SIPI that is listed in the Location field.
3. Set the IP Control field to y .
4. Verify that all the other fields are populated and submit the form to save the changes.
5. Repeat this procedure for each port network.
Setting the alarm activation level
1. At the SAT, type
change system-parameters maintenance
and press Enter .
2. In the CPE Alarm Activation Level field, enter none , warning , minor , or major ,
according to the customer request.
3. Submit the screen to save the changes.
Saving translations
To save the translations to the hard disk drive, at the SAT, type
save translation
and press
Enter .
add ipserver-interface 8
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
IP Control? y Socket Encryption? n
Ignore Connectivity in Server Arbitration? n Enable QoS? n
Primary IPSI QoS Parameters
------------ --------------
Location: 1A01 Call Control 802.1p: 6
Host: 172.22.22.174 Call Control DiffServ: 46
DHCP ID: ipsi-A01a